TwentydBBandwidthConfiguration

Provides methods to configure the TwentydBBandwidth measurement.

class nirfmxbluetooth.twenty_db_bandwidth_configuration.TwentydBBandwidthConfiguration(signal_obj)[source]

Bases: object

Provides methods to configure the TwentydBBandwidth measurement.

configure_averaging(selector_string, averaging_enabled, averaging_count)[source]

Configures averaging for the 20dBBandwidth measurement.

Parameters:

  • selector_string (string) – Pass an empty string. The signal name that is passed when creating the signal configuration is used.

  • averaging_enabled (enums.TwentydBBandwidthAveragingEnabled, int) –

    This parameter specifies whether to enable averaging for 20dBBandwidth measurement. The default value is False.

    Name (value)

    Description

    False (0)

    The measurement is performed on a single acquisition.

    True (1)

    The measurement uses the Averaging Count parameter as the number of acquisitions over which the 20dBBandwidth measurement is averaged.

  • averaging_count (int) – This parameter specifies the number of acquisitions used for averaging when you set the Averaging Enabled parameter to True. The default value is 10.

Returns:

Returns the status code of this method. The status code either indicates success or describes a warning condition.

Return type:

int

get_all_traces_enabled(selector_string)[source]

Gets whether to enable all the traces for the 20dBBandwidth measurement.

You do not need to use a selector string to configure or read this attribute for the default signal instance. Refer to the Selector String topic for information about the string syntax for named signals.

The default value is FALSE.

Parameters:

selector_string (string) – Pass an empty string.

Returns:

attr_val (bool):

Specifies whether to enable all the traces for the 20dBBandwidth measurement.

error_code (int):

Returns the status code of this method. The status code either indicates success or describes a warning condition.

Return type:

Tuple (attr_val, error_code)

get_averaging_count(selector_string)[source]

Gets the number of acquisitions used for averaging when you set the AVERAGING_ENABLED attribute to True.

You do not need to use a selector string to configure or read this attribute for the default signal instance. Refer to the Selector String topic for information about the string syntax for named signals.

The default value is 10.

Parameters:

selector_string (string) – Pass an empty string.

Returns:

attr_val (int):

Specifies the number of acquisitions used for averaging when you set the AVERAGING_ENABLED attribute to True.

error_code (int):

Returns the status code of this method. The status code either indicates success or describes a warning condition.

Return type:

Tuple (attr_val, error_code)

get_averaging_enabled(selector_string)[source]

Gets whether to enable averaging for the 20dBBandwidth measurement.

You do not need to use a selector string to configure or read this attribute for the default signal instance. Refer to the Selector String topic for information about the string syntax for named signals.

The default value is False.

Name (Value)

Description

False (0)

The measurement is performed on a single acquisition.

True (1)

The 20dBBandwidth measurement uses the 20dBBandwidth Averaging Count attribute as the number of acquisitions over which the 20dBBandwidth measurement is averaged.
Parameters:

selector_string (string) – Pass an empty string.

Returns:

attr_val (enums.TwentydBBandwidthAveragingEnabled):

Specifies whether to enable averaging for the 20dBBandwidth measurement.

error_code (int):

Returns the status code of this method. The status code either indicates success or describes a warning condition.

Return type:

Tuple (attr_val, error_code)

get_measurement_enabled(selector_string)[source]

Gets whether to enable the 20dBBandwidth measurement specified in section 4.5.5 of the Bluetooth Test Specification RF.TS.p33. The measurement uses a span of 3 MHz internally. This measurement is valid only for basic rate (BR) packets.

You do not need to use a selector string to configure or read this attribute for the default signal instance. Refer to the Selector String topic for information about the string syntax for named signals.

The default value is FALSE.

Parameters:

selector_string (string) – Pass an empty string.

Returns:

attr_val (bool):

Specifies whether to enable the 20dBBandwidth measurement specified in section 4.5.5 of the Bluetooth Test Specification RF.TS.p33. The measurement uses a span of 3 MHz internally. This measurement is valid only for basic rate (BR) packets.

error_code (int):

Returns the status code of this method. The status code either indicates success or describes a warning condition.

Return type:

Tuple (attr_val, error_code)

get_number_of_analysis_threads(selector_string)[source]

Gets the maximum number of threads used for parallelism for the 20dB bandwidth measurement.

The number of threads can range from 1 to the number of physical cores. The number of threads you set may not be used in calculations. The actual number of threads used depends on the problem size, system resources, data availability, and other considerations.

You do not need to use a selector string to configure or read this attribute for the default signal instance. Refer to the Selector String topic for information about the string syntax for named signals.

The default value is 1.

Parameters:

selector_string (string) – Pass an empty string.

Returns:

attr_val (int):

Specifies the maximum number of threads used for parallelism for the 20dB bandwidth measurement.

error_code (int):

Returns the status code of this method. The status code either indicates success or describes a warning condition.

Return type:

Tuple (attr_val, error_code)

set_all_traces_enabled(selector_string, value)[source]

Sets whether to enable all the traces for the 20dBBandwidth measurement.

You do not need to use a selector string to configure or read this attribute for the default signal instance. Refer to the Selector String topic for information about the string syntax for named signals.

The default value is FALSE.

Parameters:

  • selector_string (string) – Pass an empty string.

  • value (bool) – Specifies whether to enable all the traces for the 20dBBandwidth measurement.

Returns:

Returns the status code of this method. The status code either indicates success or describes a warning condition.

Return type:

int

set_averaging_count(selector_string, value)[source]

Sets the number of acquisitions used for averaging when you set the AVERAGING_ENABLED attribute to True.

You do not need to use a selector string to configure or read this attribute for the default signal instance. Refer to the Selector String topic for information about the string syntax for named signals.

The default value is 10.

Parameters:

  • selector_string (string) – Pass an empty string.

  • value (int) – Specifies the number of acquisitions used for averaging when you set the AVERAGING_ENABLED attribute to True.

Returns:

Returns the status code of this method. The status code either indicates success or describes a warning condition.

Return type:

int

set_averaging_enabled(selector_string, value)[source]

Sets whether to enable averaging for the 20dBBandwidth measurement.

You do not need to use a selector string to configure or read this attribute for the default signal instance. Refer to the Selector String topic for information about the string syntax for named signals.

The default value is False.

Name (Value)

Description

False (0)

The measurement is performed on a single acquisition.

True (1)

The 20dBBandwidth measurement uses the 20dBBandwidth Averaging Count attribute as the number of acquisitions over which the 20dBBandwidth measurement is averaged.
Parameters:
Returns:

Returns the status code of this method. The status code either indicates success or describes a warning condition.

Return type:

int

set_measurement_enabled(selector_string, value)[source]

Sets whether to enable the 20dBBandwidth measurement specified in section 4.5.5 of the Bluetooth Test Specification RF.TS.p33. The measurement uses a span of 3 MHz internally. This measurement is valid only for basic rate (BR) packets.

You do not need to use a selector string to configure or read this attribute for the default signal instance. Refer to the Selector String topic for information about the string syntax for named signals.

The default value is FALSE.

Parameters:

  • selector_string (string) – Pass an empty string.

  • value (bool) – Specifies whether to enable the 20dBBandwidth measurement specified in section 4.5.5 of the Bluetooth Test Specification RF.TS.p33. The measurement uses a span of 3 MHz internally. This measurement is valid only for basic rate (BR) packets.

Returns:

Returns the status code of this method. The status code either indicates success or describes a warning condition.

Return type:

int

set_number_of_analysis_threads(selector_string, value)[source]

Sets the maximum number of threads used for parallelism for the 20dB bandwidth measurement.

The number of threads can range from 1 to the number of physical cores. The number of threads you set may not be used in calculations. The actual number of threads used depends on the problem size, system resources, data availability, and other considerations.

You do not need to use a selector string to configure or read this attribute for the default signal instance. Refer to the Selector String topic for information about the string syntax for named signals.

The default value is 1.

Parameters:

  • selector_string (string) – Pass an empty string.

  • value (int) – Specifies the maximum number of threads used for parallelism for the 20dB bandwidth measurement.

Returns:

Returns the status code of this method. The status code either indicates success or describes a warning condition.

Return type:

int