"""Provides methods to configure the Txp measurement."""
import functools
import nirfmxbluetooth.attributes as attributes
import nirfmxbluetooth.enums as enums
import nirfmxbluetooth.errors as errors
import nirfmxbluetooth.internal._helper as _helper
def _raise_if_disposed(f):
"""From https://stackoverflow.com/questions/5929107/decorators-with-parameters."""
@functools.wraps(f)
def aux(*xs, **kws):
meas_obj = xs[0] # parameter 0 is 'self' which is the measurement object
if meas_obj._signal_obj.is_disposed:
raise Exception("Cannot access a disposed BT signal configuration")
return f(*xs, **kws)
return aux
[docs]
class TxpConfiguration(object):
"""Provides methods to configure the Txp measurement."""
def __init__(self, signal_obj):
"""Provides methods to configure the Txp measurement."""
self._signal_obj = signal_obj
self._session_function_lock = signal_obj._session_function_lock
self._interpreter = signal_obj._interpreter
[docs]
@_raise_if_disposed
def get_measurement_enabled(self, selector_string):
r"""Gets whether to enable the transmit power (TxP) measurements.
You do not need to use a selector string to configure or read this attribute for the default signal instance.
Refer to the `Selector String <https://www.ni.com/docs/en-US/bundle/rfmx/page/selector-strings-net.html>`_ topic for
information about the string syntax for named signals.
The default value is FALSE.
Args:
selector_string (string):
Pass an empty string.
Returns:
Tuple (attr_val, error_code):
attr_val (bool):
Specifies whether to enable the transmit power (TxP) measurements.
error_code (int):
Returns the status code of this method. The status code either indicates success or describes a warning condition.
"""
try:
self._session_function_lock.enter_read_lock()
updated_selector_string = _helper.validate_and_update_selector_string(
selector_string, self._signal_obj
)
attr_val, error_code = self._interpreter.get_attribute_i32(
updated_selector_string, attributes.AttributeID.TXP_MEASUREMENT_ENABLED.value
)
attr_val = bool(attr_val)
finally:
self._session_function_lock.exit_read_lock()
return attr_val, error_code
[docs]
@_raise_if_disposed
def set_measurement_enabled(self, selector_string, value):
r"""Sets whether to enable the transmit power (TxP) measurements.
You do not need to use a selector string to configure or read this attribute for the default signal instance.
Refer to the `Selector String <https://www.ni.com/docs/en-US/bundle/rfmx/page/selector-strings-net.html>`_ topic for
information about the string syntax for named signals.
The default value is FALSE.
Args:
selector_string (string):
Pass an empty string.
value (bool):
Specifies whether to enable the transmit power (TxP) measurements.
Returns:
int:
Returns the status code of this method. The status code either indicates success or describes a warning condition.
"""
try:
self._session_function_lock.enter_read_lock()
updated_selector_string = _helper.validate_and_update_selector_string(
selector_string, self._signal_obj
)
error_code = self._interpreter.set_attribute_i32(
updated_selector_string,
attributes.AttributeID.TXP_MEASUREMENT_ENABLED.value,
int(value),
)
finally:
self._session_function_lock.exit_read_lock()
return error_code
[docs]
@_raise_if_disposed
def get_burst_synchronization_type(self, selector_string):
r"""Gets the type of synchronization used for detecting the start of packet in the transmit power (TXP) measurement.
You do not need to use a selector string to configure or read this attribute for the default signal instance.
Refer to the `Selector String <https://www.ni.com/docs/en-US/bundle/rfmx/page/selector-strings-net.html>`_ topic for
information about the string syntax for named signals.
The default value is **Preamble**.
+---------------+--------------------------------------------------------------------------------------------------------------------------+
| Name (Value) | Description |
+===============+==========================================================================================================================+
| None (0) | Specifies that the measurement does not perform synchronization to detect the start of the packet. |
+---------------+--------------------------------------------------------------------------------------------------------------------------+
| Preamble (1) | Specifies that the measurement uses the preamble field to detect the start of the packet. |
+---------------+--------------------------------------------------------------------------------------------------------------------------+
| Sync Word (2) | Specifies that the measurement uses sync word for the BR/EDR packets and access address for LE/LE-CS packets to detect |
| | the start of the packet. For BR /EDR packets, the sync word is derived from the BD Address LAP attribute. |
+---------------+--------------------------------------------------------------------------------------------------------------------------+
Args:
selector_string (string):
Pass an empty string.
Returns:
Tuple (attr_val, error_code):
attr_val (enums.TxpBurstSynchronizationType):
Specifies the type of synchronization used for detecting the start of packet in the transmit power (TXP) measurement.
error_code (int):
Returns the status code of this method. The status code either indicates success or describes a warning condition.
"""
try:
self._session_function_lock.enter_read_lock()
updated_selector_string = _helper.validate_and_update_selector_string(
selector_string, self._signal_obj
)
attr_val, error_code = self._interpreter.get_attribute_i32(
updated_selector_string, attributes.AttributeID.TXP_BURST_SYNCHRONIZATION_TYPE.value
)
attr_val = enums.TxpBurstSynchronizationType(attr_val)
except (KeyError, ValueError):
raise errors.DriverTooNewError() # type: ignore
finally:
self._session_function_lock.exit_read_lock()
return attr_val, error_code
[docs]
@_raise_if_disposed
def set_burst_synchronization_type(self, selector_string, value):
r"""Sets the type of synchronization used for detecting the start of packet in the transmit power (TXP) measurement.
You do not need to use a selector string to configure or read this attribute for the default signal instance.
Refer to the `Selector String <https://www.ni.com/docs/en-US/bundle/rfmx/page/selector-strings-net.html>`_ topic for
information about the string syntax for named signals.
The default value is **Preamble**.
+---------------+--------------------------------------------------------------------------------------------------------------------------+
| Name (Value) | Description |
+===============+==========================================================================================================================+
| None (0) | Specifies that the measurement does not perform synchronization to detect the start of the packet. |
+---------------+--------------------------------------------------------------------------------------------------------------------------+
| Preamble (1) | Specifies that the measurement uses the preamble field to detect the start of the packet. |
+---------------+--------------------------------------------------------------------------------------------------------------------------+
| Sync Word (2) | Specifies that the measurement uses sync word for the BR/EDR packets and access address for LE/LE-CS packets to detect |
| | the start of the packet. For BR /EDR packets, the sync word is derived from the BD Address LAP attribute. |
+---------------+--------------------------------------------------------------------------------------------------------------------------+
Args:
selector_string (string):
Pass an empty string.
value (enums.TxpBurstSynchronizationType, int):
Specifies the type of synchronization used for detecting the start of packet in the transmit power (TXP) measurement.
Returns:
int:
Returns the status code of this method. The status code either indicates success or describes a warning condition.
"""
try:
self._session_function_lock.enter_read_lock()
updated_selector_string = _helper.validate_and_update_selector_string(
selector_string, self._signal_obj
)
value = value.value if type(value) is enums.TxpBurstSynchronizationType else value
error_code = self._interpreter.set_attribute_i32(
updated_selector_string,
attributes.AttributeID.TXP_BURST_SYNCHRONIZATION_TYPE.value,
value,
)
finally:
self._session_function_lock.exit_read_lock()
return error_code
[docs]
@_raise_if_disposed
def get_averaging_enabled(self, selector_string):
r"""Gets whether to enable averaging for the transmit power (TxP) measurements.
You do not need to use a selector string to configure or read this attribute for the default signal instance.
Refer to the `Selector String <https://www.ni.com/docs/en-US/bundle/rfmx/page/selector-strings-net.html>`_ topic for
information about the string syntax for named signals.
The default value is **False**.
+--------------+--------------------------------------------------------------------------------------------------------------------------+
| Name (Value) | Description |
+==============+==========================================================================================================================+
| False (0) | The measurement is performed on a single acquisition. |
+--------------+--------------------------------------------------------------------------------------------------------------------------+
| True (1) | The measurement uses the TXP Averaging Count attribute as the number of acquisitions over which the TXP measurement is |
| | averaged. |
+--------------+--------------------------------------------------------------------------------------------------------------------------+
Args:
selector_string (string):
Pass an empty string.
Returns:
Tuple (attr_val, error_code):
attr_val (enums.TxpAveragingEnabled):
Specifies whether to enable averaging for the transmit power (TxP) measurements.
error_code (int):
Returns the status code of this method. The status code either indicates success or describes a warning condition.
"""
try:
self._session_function_lock.enter_read_lock()
updated_selector_string = _helper.validate_and_update_selector_string(
selector_string, self._signal_obj
)
attr_val, error_code = self._interpreter.get_attribute_i32(
updated_selector_string, attributes.AttributeID.TXP_AVERAGING_ENABLED.value
)
attr_val = enums.TxpAveragingEnabled(attr_val)
except (KeyError, ValueError):
raise errors.DriverTooNewError() # type: ignore
finally:
self._session_function_lock.exit_read_lock()
return attr_val, error_code
[docs]
@_raise_if_disposed
def set_averaging_enabled(self, selector_string, value):
r"""Sets whether to enable averaging for the transmit power (TxP) measurements.
You do not need to use a selector string to configure or read this attribute for the default signal instance.
Refer to the `Selector String <https://www.ni.com/docs/en-US/bundle/rfmx/page/selector-strings-net.html>`_ topic for
information about the string syntax for named signals.
The default value is **False**.
+--------------+--------------------------------------------------------------------------------------------------------------------------+
| Name (Value) | Description |
+==============+==========================================================================================================================+
| False (0) | The measurement is performed on a single acquisition. |
+--------------+--------------------------------------------------------------------------------------------------------------------------+
| True (1) | The measurement uses the TXP Averaging Count attribute as the number of acquisitions over which the TXP measurement is |
| | averaged. |
+--------------+--------------------------------------------------------------------------------------------------------------------------+
Args:
selector_string (string):
Pass an empty string.
value (enums.TxpAveragingEnabled, int):
Specifies whether to enable averaging for the transmit power (TxP) measurements.
Returns:
int:
Returns the status code of this method. The status code either indicates success or describes a warning condition.
"""
try:
self._session_function_lock.enter_read_lock()
updated_selector_string = _helper.validate_and_update_selector_string(
selector_string, self._signal_obj
)
value = value.value if type(value) is enums.TxpAveragingEnabled else value
error_code = self._interpreter.set_attribute_i32(
updated_selector_string, attributes.AttributeID.TXP_AVERAGING_ENABLED.value, value
)
finally:
self._session_function_lock.exit_read_lock()
return error_code
[docs]
@_raise_if_disposed
def get_averaging_count(self, selector_string):
r"""Gets the number of acquisitions used for averaging when you set the
:py:attr:`~nirfmxbluetooth.attributes.AttributeID.AVERAGING_ENABLED` attribute to **True**.
You do not need to use a selector string to configure or read this attribute for the default signal instance.
Refer to the `Selector String <https://www.ni.com/docs/en-US/bundle/rfmx/page/selector-strings-net.html>`_ topic for
information about the string syntax for named signals.
The default value is 10.
Args:
selector_string (string):
Pass an empty string.
Returns:
Tuple (attr_val, error_code):
attr_val (int):
Specifies the number of acquisitions used for averaging when you set the
:py:attr:`~nirfmxbluetooth.attributes.AttributeID.AVERAGING_ENABLED` attribute to **True**.
error_code (int):
Returns the status code of this method. The status code either indicates success or describes a warning condition.
"""
try:
self._session_function_lock.enter_read_lock()
updated_selector_string = _helper.validate_and_update_selector_string(
selector_string, self._signal_obj
)
attr_val, error_code = self._interpreter.get_attribute_i32(
updated_selector_string, attributes.AttributeID.TXP_AVERAGING_COUNT.value
)
finally:
self._session_function_lock.exit_read_lock()
return attr_val, error_code
[docs]
@_raise_if_disposed
def set_averaging_count(self, selector_string, value):
r"""Sets the number of acquisitions used for averaging when you set the
:py:attr:`~nirfmxbluetooth.attributes.AttributeID.AVERAGING_ENABLED` attribute to **True**.
You do not need to use a selector string to configure or read this attribute for the default signal instance.
Refer to the `Selector String <https://www.ni.com/docs/en-US/bundle/rfmx/page/selector-strings-net.html>`_ topic for
information about the string syntax for named signals.
The default value is 10.
Args:
selector_string (string):
Pass an empty string.
value (int):
Specifies the number of acquisitions used for averaging when you set the
:py:attr:`~nirfmxbluetooth.attributes.AttributeID.AVERAGING_ENABLED` attribute to **True**.
Returns:
int:
Returns the status code of this method. The status code either indicates success or describes a warning condition.
"""
try:
self._session_function_lock.enter_read_lock()
updated_selector_string = _helper.validate_and_update_selector_string(
selector_string, self._signal_obj
)
error_code = self._interpreter.set_attribute_i32(
updated_selector_string, attributes.AttributeID.TXP_AVERAGING_COUNT.value, value
)
finally:
self._session_function_lock.exit_read_lock()
return error_code
[docs]
@_raise_if_disposed
def get_all_traces_enabled(self, selector_string):
r"""Gets whether to enable all the traces used for transmit power (TxP) measurements.
You do not need to use a selector string to configure or read this attribute for the default signal instance.
Refer to the `Selector String <https://www.ni.com/docs/en-US/bundle/rfmx/page/selector-strings-net.html>`_ topic for
information about the string syntax for named signals.
The default value is FALSE.
Args:
selector_string (string):
Pass an empty string.
Returns:
Tuple (attr_val, error_code):
attr_val (bool):
Specifies whether to enable all the traces used for transmit power (TxP) measurements.
error_code (int):
Returns the status code of this method. The status code either indicates success or describes a warning condition.
"""
try:
self._session_function_lock.enter_read_lock()
updated_selector_string = _helper.validate_and_update_selector_string(
selector_string, self._signal_obj
)
attr_val, error_code = self._interpreter.get_attribute_i32(
updated_selector_string, attributes.AttributeID.TXP_ALL_TRACES_ENABLED.value
)
attr_val = bool(attr_val)
finally:
self._session_function_lock.exit_read_lock()
return attr_val, error_code
[docs]
@_raise_if_disposed
def set_all_traces_enabled(self, selector_string, value):
r"""Sets whether to enable all the traces used for transmit power (TxP) measurements.
You do not need to use a selector string to configure or read this attribute for the default signal instance.
Refer to the `Selector String <https://www.ni.com/docs/en-US/bundle/rfmx/page/selector-strings-net.html>`_ topic for
information about the string syntax for named signals.
The default value is FALSE.
Args:
selector_string (string):
Pass an empty string.
value (bool):
Specifies whether to enable all the traces used for transmit power (TxP) measurements.
Returns:
int:
Returns the status code of this method. The status code either indicates success or describes a warning condition.
"""
try:
self._session_function_lock.enter_read_lock()
updated_selector_string = _helper.validate_and_update_selector_string(
selector_string, self._signal_obj
)
error_code = self._interpreter.set_attribute_i32(
updated_selector_string,
attributes.AttributeID.TXP_ALL_TRACES_ENABLED.value,
int(value),
)
finally:
self._session_function_lock.exit_read_lock()
return error_code
[docs]
@_raise_if_disposed
def get_number_of_analysis_threads(self, selector_string):
r"""Gets the maximum number of threads used for parallelism for TXP measurement.
The number of threads can range from 1 to the number of physical cores. The number of threads you set may not
be used in calculations. The actual number of threads used depends on the problem size, system resources, data
availability, and other considerations.
You do not need to use a selector string to configure or read this attribute for the default signal instance.
Refer to the `Selector String <https://www.ni.com/docs/en-US/bundle/rfmx/page/selector-strings-net.html>`_ topic for
information about the string syntax for named signals.
The default value is 1.
Args:
selector_string (string):
Pass an empty string.
Returns:
Tuple (attr_val, error_code):
attr_val (int):
Specifies the maximum number of threads used for parallelism for TXP measurement.
The number of threads can range from 1 to the number of physical cores. The number of threads you set may not
be used in calculations. The actual number of threads used depends on the problem size, system resources, data
availability, and other considerations.
error_code (int):
Returns the status code of this method. The status code either indicates success or describes a warning condition.
"""
try:
self._session_function_lock.enter_read_lock()
updated_selector_string = _helper.validate_and_update_selector_string(
selector_string, self._signal_obj
)
attr_val, error_code = self._interpreter.get_attribute_i32(
updated_selector_string, attributes.AttributeID.TXP_NUMBER_OF_ANALYSIS_THREADS.value
)
finally:
self._session_function_lock.exit_read_lock()
return attr_val, error_code
[docs]
@_raise_if_disposed
def set_number_of_analysis_threads(self, selector_string, value):
r"""Sets the maximum number of threads used for parallelism for TXP measurement.
The number of threads can range from 1 to the number of physical cores. The number of threads you set may not
be used in calculations. The actual number of threads used depends on the problem size, system resources, data
availability, and other considerations.
You do not need to use a selector string to configure or read this attribute for the default signal instance.
Refer to the `Selector String <https://www.ni.com/docs/en-US/bundle/rfmx/page/selector-strings-net.html>`_ topic for
information about the string syntax for named signals.
The default value is 1.
Args:
selector_string (string):
Pass an empty string.
value (int):
Specifies the maximum number of threads used for parallelism for TXP measurement.
The number of threads can range from 1 to the number of physical cores. The number of threads you set may not
be used in calculations. The actual number of threads used depends on the problem size, system resources, data
availability, and other considerations.
Returns:
int:
Returns the status code of this method. The status code either indicates success or describes a warning condition.
"""
try:
self._session_function_lock.enter_read_lock()
updated_selector_string = _helper.validate_and_update_selector_string(
selector_string, self._signal_obj
)
error_code = self._interpreter.set_attribute_i32(
updated_selector_string,
attributes.AttributeID.TXP_NUMBER_OF_ANALYSIS_THREADS.value,
value,
)
finally:
self._session_function_lock.exit_read_lock()
return error_code